虎杖中防晒成分的提取与脱色研究

采用紫外分光光度法,以紫外吸收值为指标,研究了虎杖中防晒成分的超声波提取以及脱色对其防晒能力的影响。50%乙醇为虎杖中防晒成分超声波提取的较好溶剂,虎杖具有较强紫外线吸收即防晒能力,是具有广谱防晒作用的天然植物,但脱色对虎杖防晒能力有较大影响。     

超声萃取-C_(18)柱净化-GC/MS法测定土壤中邻苯二甲酸酯类污染物

采用超声波辅助萃取-非极性C18固相萃取小柱净化-GC/MS技术,测定了土壤样品中6种邻苯二甲酸酯类污染物;对最佳溶剂萃取条件和最佳净化条件进行了优化;在最佳实验条件下,方法的相对标准偏差在6.5%—10.6%之间,最低检出限在0.005—0.049mg/kg之间,实际土样加标回收率在73.9%—105.4%之间。     

Ultrasonic system for continuous washing of textiles in liquid layers

The use of ultrasonic energy for washing of textiles has been tried several times without achieving practical development. In fact, the softness of the fibres makes the cavitation to produce small erosion effect and the reticulate structure of the fabric favours the formation of air bubble layers which obstruct wave penetration. In addition, a high proportion of water with respect to the wash load and a certain water degassing is required to assure efficiency and homogeneity in the wash performance. Such requirements have hindered the commercial development of the ultrasonic washing machines for domestic purposes. For specific industrial applications, a great part of these limitations may be overcome. This article deals with a new process in which the fabric is exposed to the ultrasonic field in a flat format. Such process has been implemented at laboratory and at semi-industrial stage by using specially designed power ultrasonic transducers with rectangular plate radiators. The cleaning effect is produced by the intense cavitation field generated by the plate radiator within a thin layer of liquid where the fabric is introduced. The homogeneity of such effect is achieved by the successive exposure of all the fabric areas to the intense acoustic field. In this paper the structure and performance of the developed system are shown.     

Synthesis of Flower-like Manganese Wad and Its Decolorization Performance for Azo Dye Congo Red

Flower-like manganese wad（MW） with high activity was synthesized via ultrasonic-assisted redox reaction of sole manganese salt MnO4-.MW was characterized by X-ray diffraction（XRD）,scanning electron microscopy（SEM） and X-ray photoelectron spectroscopy（XPS）.The experimental results indicate that the maximum decolorization rate of Congo red（CR） reached above 95％ within 15 min in a wide pH range from 2.0 to 6.0.Results also show that MW has excellent decolorization performance for azo dye CR which implies potential application for removing dye pollutants from industrial effluents.     

基于超高效液相色谱-四极杆飞行时间高分辨质谱的高通量血清代谢组学方法

采用超高效液相色谱-四极杆飞行时间高分辨质谱(UPLC-QTOFMS)联用技术, 对血清前处理进行了考察和优化, 并对液-质联用分析条件进行了优化, 旨在建立用于血清中广谱小分子代谢物分析的高通量强耐用代谢组学方法, 以期满足大批次生物样本数代谢组学研究的要求(样本数≥400个). 通过考察不同有机溶剂沉淀蛋白对血清中蛋白的去除程度及38个代表性标准品化合物的提取效果, 确定采用甲醇/乙腈(体积比1: 9)沉淀蛋白法. 血清和有机溶剂的体积比不小于1: 4时, 达到最佳的沉淀蛋白处理效果, 符合大批量样本测试的要求; 预先冷藏沉淀蛋白的有机溶剂, 涡旋2 min, 超声1 min, 加入有机溶剂后冷冻静置10 min, 可以进一步提高前处理沉淀蛋白和化合物提取的效果. 通过对不同流动相体系和梯度条件的考察, 对液-质联用分析条件进行了优化. 方法学考察结果表明, 本方法重现性、 精密度及稳定性均良好. 对重现性和48 h稳定性数据进行变异系数分析和主成分分析法的多维分析, 证明本方法在代谢组学研究中的可重复性及所得数据的可靠性. 本方法高通量强耐用, 每天可测定100多个血清样本(13 min测定1个样本), 适用于代谢组学研究, 特别是大批次生物样本的代谢组学研究.     

超声刻蚀法构建分级结构的超疏水表面

在湿法刻蚀和超声空化的基础上, 采用超声刻蚀法制备了具有微纳米分级结构的超疏水表面. 以等体积比的硝酸/乙醇(体积分数为4%)和双氧水(质量分数为30%)的混合溶液作为刻蚀剂, 在室温下对60Si2Mn钢、 60^#钢、 T10钢、 Cr06钢、 65Mn钢和硅钢表面超声刻蚀2~10 min, 构建出多种形貌的微纳米分级结构. 上述表面经氟硅烷修饰后具有超疏水性, 水的表观接触角高达157.0°, 155.8°, 157.4°, 154.9°, 157.6°和156.8°, 滚动角分别为6.5°, 19.2°, 6.1°, 7.8°, 6.7°和7.2°. 与常规刻蚀方法相比, 超声刻蚀的化学刻蚀作用因与空化作用耦合而得到强化和改变, 从而在钢表面构建出分级结构. 由于材料表面微结构形貌和固/液界面接触状态不同, 制得的超疏水表面表现出的润湿行为也不同. 超声刻蚀法简单易行, 成本低廉, 适用于其它金属表面构建微纳米分级结构和超疏水表面.     

低温陈化超声波共沉淀制备SO4^2-/ZrO2-La2O3催化剂

低温陈化超声波共沉淀法制得SO4^2-/ZrO2-La2O3前驱体,经H2SO4处理,在不同温度下焙烧得到纳米晶催化剂SO4^2-/ZrO2-La2O3;用Hammett指示剂法测定其酸性．用XRD、BET、TEM、IR和XPS对样品进行表征,其催化活性用醋酸和甘油的酯化反应进行了评价．结果表明经超声波搅拌和低温（-15℃）陈化,650℃焙烧4h得到的固体超强酸表现出较高催化活性．     

面向开环扫描系统的超声图像畸变校正方法

超声显微成像技术广泛应用于工业无损检测领域。相较于闭环、半闭环扫描系统硬件复杂、成本高,开环扫描系统结构简单、成本低,但由于无反馈机制会导致步进电机的非线性运动引起图像像素错位畸变。因此,消除非线性运动带来的错位畸变是采用开环扫描系统实现高质量超声成像的关键。该文提出集最大值投影法、最大类间方差法和中心坐标校正法于一体的MIP-Otsu-C³M方法,对开环扫描系统获得的硬币回波数据采用最大值投影法获取初始灰度图像,采用最大类间方差法获取感兴趣区域的B扫描图像边缘像素位置,并采用中心坐标校正法成功消除像素错位,解决了超声C扫描图像畸变问题。对消除错位畸变的回波数据进行飞行时间法和傅里叶变换法图像重建,直接获得了非畸变的三维图像和透视图像。该新颖算法也验证了最大值投影法可拓展至图像畸变校正应用。     

Effect of ultrasonic vibration time on the Cu/Sn-Ag-Cu/Cu joint soldered by low-power-high-frequency ultrasonic-assisted reflow soldering

Techniques to improve solder joint reliability have been the recent research focus in the electronic packaging industry. In this study, Cu/SAC305/Cu solder joints were fabricated using a low-power high-frequency ultrasonic-assisted reflow soldering approach where non-ultrasonic-treated samples were served as control sample. The effect of ultrasonic vibration (USV) time (within 6 s) on the solder joint properties was characterized systematically. Results showed that the solder matrix microstructure was refined at 1.5 s of USV, but coarsen when the USV time reached 3 s and above. The solder matrix hardness increased when the solder matrix was refined, but decreased when the solder matrix coarsened. The interfacial intermetallic compound (IMC) layer thickness was found to decrease with increasing USV time, except for the USV-treated sample with 1.5 s. This is attributed to the insufficient USV time during the reflow stage and consequently accelerated the Cu dissolution at the joint interface during the post-ultrasonic reflow stage. All the USV-treated samples possessed higher shear strength than the control sample due to the USV-induced-degassing effect. The shear strength of the USV-treated sample with 6 s was the lowest among the USV-treated samples due to the formation of plate-like Ag₃Sn that may act as the crack initiation site.     

Novel ionic liquid supported on Fe3O4 nanoparticles and its application as a catalyst in Mannich reaction under ultrasonic irradiation

A family of novel ionic liquid with l-alanine and choline chloride as environmentally benign materials have been synthesized and grafted on Fe₃O₄ nanoparticles using easy preparation techniques. The structure of ionic liquid supported on Fe₃O₄ nanoparticles (IL-Fe₃O₄ NPs) characterized by various analyses such as FE-SEM, EDX, XRD, NMR, FTIR and VSM. The catalytic activities of this catalyst are examined in the Mannich reaction for synthesis of β-aminocarbonyl compounds under ultrasonic irradiation. The recyclability of catalyst is investigated, and the results have indicated that the catalyst can be recycled six times without obvious activity decreasing.